Technologies available for licensing, investment, joint ventures and R&D contracts in Ukraine, Azerbaijan, Georgia, Moldova, Uzbekistan

Frontpage Slideshow (version 2.0.0) - Copyright © 2006-2008 by JoomlaWorks

Google Translate

Patenting Information

Tag Cloud



Free counters!

Home Environmental Complex photovoltaic and heat module

Complex photovoltaic and heat module

Description

Complex photovoltaic and heat module (PVH) is designed for simultaneous thermal and electrical power generation. The module consists of electrical and thermal parts located in hermetic frame which allow serial connecting of several modules in one block construction. Light capture effective area of the PVH – 0,6 m2.

If solar radiation density is 1000W/m2 electrical power amounts to 75 W. Under such conditions about 100 liters of hot water 60°C could be obtained in 6 hours.

Innovative Aspect and Main Advantages

The suggested PVH design has got the following advantages over current solar installations:

  • simultaneous heat and power generation;
  • has got a wider application sphere;
  • considerably increases solar energy use from the unit of area occupied by the PVH (compactness factor).

Areas of Application

PVH can be used for power supply of different buildings (industrial, municipal and private houses as well). The goals achieved – energy conservation, energy carriers savings, decreasing environmental pollution.

Complex PVH module
Fig. 1 Complex PVH module

Stage of Development

Pilot model and technical design have been produced and tested.

Contact Details

Tamila Surzhyk,PhD
Institute of Renewable Energy at NAS of Ukraine
Address: Chervonogvardijska 20 A, Kyiv, Ukraine, 02094
Tel./Fax: +38(044) 537-2657
Tel.: +38(044) 240-9008
E-mail: This e-mail address is being protected from spambots. You need JavaScript enabled to view it

Add comment


Security code
Refresh

For additional technologies go to: http://www.stcu.int