Technologies available for licensing, investment, joint ventures and R&D contracts in Ukraine, Azerbaijan, Georgia, Moldova, Uzbekistan

Frontpage Slideshow (version 2.0.0) - Copyright © 2006-2008 by JoomlaWorks

Google Translate

Patenting Information

Tag Cloud



Free counters!

Home Georgian Technologies

Ion-Implanted Semi-Conducting Detector of Thermal Neutrons

Samples ISDTN SIPT

Compact neutron detector that effectively registers thermal neutrons flow has been main tool for environment protection, nuclear reactors safety and maintenance of international agreements on nonproliferation.
Yuri Nardaya
Organization: Sukhumi Institute of Physics and Technology (SIPT)
(+995 32) 33 5520
This e-mail address is being protected from spambots. You need JavaScript enabled to view it

SHS-Filter Developed by Self-Propagating High-Temperature Synthesis (SHS)

Filtering product containing SHS filters

By Self-propagating High-temperature Synthesis (SHS) method at atmospheric pressure from cheap oxides and a metal-restoration by two stages the filter for water treating and gases has been developed.
George Oniashvili
Organization: F.Tavadze Institute of Metallurgy and Materials Science
(+995 32) 38 2942; (+995 99) 41 6162
This e-mail address is being protected from spambots. You need JavaScript enabled to view it

Synthesis of Two- and Multilayer Functionally Gradient Materials

FGMs obtained by SHS.

Hard alloys with high physical and mechanical properties make them very useful in several branches of engineering. However, wider application of the material is limited by their brittleness and inability to protect shock stresses. This deficiency of hard alloys may be avoided by creation of graded materials with very disperse grains.
George Oniashvili
Organization: F.Tavadze Institute of Metallurgy and Materials Science
(+995 32) 38 2942; (+995 99) 41 6162
This e-mail address is being protected from spambots. You need JavaScript enabled to view it

Production of Manganese Sulfate by Bacterial Leaching of Manganese-Containing Industrial Waste

Manufacture wastes.

The technology is attributed to biotechnology of metals, in particular, to bacterial leaching from manganese-containing industrial wastes. Leaching is realizable from industrial wastes with any content of manganese: ore-enriching industrial slurry, tails, solutions, silico-manganese and ferromanganese industrial slag, dust, unutilized ore, etc. End product of bacterial leaching is water solution of manganese sulfate.

Cryogenic Vacuum Systems, Technologies and Equipment

Cryogenic pump

The modern stage of vacuum engineering is characterized by important features of increase requirement to getting and conservation of vacuum.
Yuri Nardaya
Organization: Sukhumi Institute of Physics and Technology (SIPT)
(+995 32) 33 5520
This e-mail address is being protected from spambots. You need JavaScript enabled to view it

Firmly Floatable Tips for Cutters of Milling Road Cars with Forces

Finished samples with firmly floatable tips

Method of self-propagating high-temperature synthesis (SHS), in the field of mass forces, receive in one stage a material and a product in the form of cast Firmly floatable a tip from cheap mixture, on the basis of oxides of transitive metals IV-VIII of groups and metal-restoration.
George Oniashvili
Organization: F.Tavadze Institute of Metallurgy and Materials Science
(+995 32) 38 2942; (+995 99) 41 6162
This e-mail address is being protected from spambots. You need JavaScript enabled to view it

Self-Propagating High-Temperature Synthesis (SHS) for Production of Single-Phase Nanocrystalline Materials of Ti-Al System

Single phase and nano structured materials.

Wide application of the alloys based on titanium aluminides is restrained by the lack in effective and inexpensive production technologies.
George Oniashvili
Organization: F.Tavadze Institute of Metallurgy and Materials Science
(+995 32) 38 2942; (+995 99) 41 6162
This e-mail address is being protected from spambots. You need JavaScript enabled to view it

Wear Resistant Products with Enduring Operational Life

Crown for dipper teeth

At present opportunities of increase properties of metal alloys by using of traditional alloying and modification methods have practically exhausted themselves. Using in these processes refractory oxide, nitride or carbon - nitride nanomaterials, which are characterized by high sedimentation stability at a level of dislocation structures, enables useful increasing of mechanical and technological properties of products.